Solid bass sound with tight lows.

The Eminence Legend BP102 10" Bass Speaker delivers rich bass tone with a lot of punch. Recommended for professional bass guitar applications in sealed or vented enclosures. The replacement speaker works well in single or multi-driver designs.

Use the Eminence Legend BP102 as a direct replacement speaker in the Ampeg SVT-810E, the Kustom Groove 4120, the Gallian-Krueger 4120 SBX, the Ashdown MAG 410T & MAG810T, and the Basson B410B speaker cabinets. Eminence recommends the Legend BP102 as a direct replacement in the Kustom Groove 310C, the Ampeg BA210SP, the Peavey Bam 210 combo amps.

Eminence Legend BP102 10" 200W Bass Speaker Features:

• Rich bass tone with good punch
• Tight low-end sound
• Recommended for sealed or vented enclosures
• Works well in single or multi-driver cabs

Put this Eminence bass speaker in the cart and make your bass cab sound better than new.

Eminence Legend BP102 10" 200W Bass Speaker Specifications:

• Nominal Basket Diameter: 10", 254mm
• Nominal Impedance*: 8 ohms
• Power Rating**: 200W
• Resonance: 35Hz
• Usable Frequency Range: 40Hz-2kHz
• Sensitivity***: 92
• Magnet Weight: 38 oz.
• Gap Height: 0.312", 7.92mm
• Voice Coil Diameter : 2", 50.8mm
  
  Resonant Frequency (fs): 35Hz
• DC Resistance (Re): 5.59
• Coil Inductance (Le): 0.83mH
• Mechanical Q (Qms): 5.36
• Electromagnetic Q (Qes): 0.47
• Total Q (Qts): 0.43
• Compliance Equivalent Volume (Vas): 91.2 liters / 3.2 cu. ft.
• Peak Diaphragm Displacement Volume (Vd): 207cc
• Mechanical Compliance of Suspension (Cms): 0.54mm/N
• BL Product (BL): 10.0 T-M
• Diaphragm Mass inc. Airload (Mms): 38 grams
• Efficiency Bandwidth Product (EBP): 75
• Maximum Linear Excursion (Xmax): 6.2mm
• Surface Area of Cone (Sd): 334.5 cm2
• Maximum Mechanical Limit (Xlim): 10.0mm
  
  Mounting Information
• Recommended Enclosure Volume
• Sealed: 14-28 liters/ 0.5-1 cu.ft.
• Vented: 25.5-62 liters/ 0.9-2.2 cu.ft.
• Overall Diameter: 10.08", 256.1mm
• Baffle Hole Diameter: 9.05", 229.7mm
• Front Sealing Gasket: fitted as standard
• Rear Sealing Gasket:
• Mounting Holes Diameter: 0.25", 6.4mm
• Mounting Holes B.C.D.: 9.66", 245.4mm
• Depth: 4.25", 108mm
• Net Weight: 8.9 lbs., 4 kg
• Shipping Weight: 9.1 lbs., 4.1 kg
  
  Materials of Construction
• Copper voice coil
• Polyimide former
• Ferrite magnet
• Non-vented core
• Pressed steel basket
• Paper Cone
• Cloth cone edge
• Zurette dust cap
  
  *Please inquire about alternative impedances.
• **Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.
• ***The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms.
• Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software
• calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with
• fiberglass on all six surfaces (three with custom-made wedges)

Eminence Legend BP102 10" 200W Bass Speaker

Write A Review

1 User Rating

Overall

Quality

Features

Value

Customer Reviews

Overall

Quality

Features

Value

One versatile speaker

Posted by Alex from Nashville on Oct 20, 2008

Experience w/product: I own it

Reviewer's Background: Musician, home theatre owner, speaker designer-

Reviewer's Play Style: rock, classic rock, soundtrack

THis is a very cost effective, versatile speaker. Whilst many use this as a speaker for bass guitar amplification, I used a pair of these to make a home theatre/3 - way stereo speaker set, as woofers. They work well with both formats.

The copper voice coils gives the BP102 Legend a beautiful, rich tone; the bass guitar aspect bestows these speakers with superb lows, all the way down to 1 octave below Low E (40 hz), when used as woofers; the 200w RMS power handling allows high power use OR extreme overheads in a 110/120 watt per channel application. These speakers can easily handle 300-400w peak power, so you will have approx. 6-9 db overhead in case of overdriven modulation.

I used a 750 hz cutoff in my crossover network, so only the 35 hz-750 hz range was used in my speaker application; the Legend's range is 35-2000hz, with the main response being in the 35-1500hz range, so this speaker is ideal for this application.

The clarity of bass notes on the Legend BP102 is exceptional. The cost is very reasonable. The performance is excellent. Add a quality midrange and a high quality tweeter, (plus a reasonably good crossover) and this speaker will give you an audio system very good for loudspeaker/stereo use, and extraordinary for home theatre use.

If you would like to write a review, please see our product review guidelines.

Eminence Legend BP102 10" 200W Bass Speaker

Read 1 Review