The sound of hemp!

The Eminence Lil Buddy 10" 50-watt replacement speaker has clean and full tone. The Lil' Buddy is slow to break-up, but crunchy when driven. Smoother and less defined than many 10" guitar speakers, this lightweight American-made guitar speaker has a hemp cone and is great for jazz and blues.

Save BIG when you buy today!

Eminence Lil' Buddy 10 50W Guitar Speaker Specifications:

• SPECIFICATIONS
• Nominal Basket Diameter: 10", 254mm
• Nominal Impedance*: 8 ohms
• Power Rating: Watts 50W
• Music Program
• Resonance: 149Hz
• Usable Frequency Range: 80Hz-5kHz
• Sensitivity***: 99.1
• Magnet Weight: 30 oz.
  
  Gap Height: 0.312", 7.92mm
• Voice Coil Diameter: 1.75", 44.5mm
• THIELE & SMALL PARAMETERS
• Resonant Frequency (fs): 149Hz
• DC Resistance (Re): 6.31
• Coil Inductance (Le): 0.46mH
• Mechanical Q (Qms): 9.06
• Electromagnetic Q (Qes): 0.93
• Total Q (Qts): 0.84
• Compliance Equivalent Volume (Vas): 10 liters / 0.35 cu. ft.
• Peak Diaphragm Displacement Volume (Vd): 29cc
• Mechanical Compliance of Suspension (Cms): 0.05mm/N
• BL Product (BL): 11.7 T-M
• Diaphram Mass inc. Airload (Mms): 22 grams
• Efficiency Bandwidth Product (EBP): 160
• Maximum Linear Excursion (Xmax): 0.8mm
• Surface Area of Cone (Sd): 366.1 cm2
  
  MOUNTING INFORMATION
• Recommended Enclosure: Sealed (Vented Acceptable)
• Overall Diameter: 10.11", 256.8mm
• Baffle Hole Diameter: 9.13", 231.8mm
• Front Sealing Gasket: fitted as standard
• Rear Sealing Gasket: fitted as standard
• Mounting Holes Diameter: 0.23", 5.7mm
• Mounting Holes B.C. D.: 9.60", 243.8mm
• Depth: 4.3", 109mm
• Net Weight: 6.3 lbs., 2.9 kg
• Shipping Weight: 7.4 lbs., 3.4 kg
• MATERIALS OF CONSTRUCTION
• Coil Construction: Copper voice coil
• Coil Former: Paper former
• Magnet Composition: Ferrite magnet
• Core Details: Non-vented core
• Basket Materials: Pressed steel basket
• Cone Composition: Hemp Cone
• Cone Edge Composition: Paper cone edge
• Dustcap Composition: Zurette dust cap
  
  *Please inquire about alternative impedances.
  
  **Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.
  
  ***The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms.
• Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software
• calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with
• fiberglass on all six surfaces (three with custom-made wedges).

Eminence Lil' Buddy 10 50W Guitar Speaker

Write A Review

1 User Rating

Overall

Quality

Features

Value

Customer Reviews

Overall

Quality

Features

Value

Lil Buddy 10

Posted by gilms from Rosedale, VA on Jan 4, 2008

Experience w/product: I own it

Reviewer's Background: guitar builder (hobby)

Reviewer's Play Style: rock, blues

A great replacement speaker for the Epi Valve Special. More volume and much, much clearer tone. More and clearer treble, midrange and bass--lets you sculpt the tone much easier and gets rid of the muddiness the stock speaker brings.

If you would like to write a review, please see our product review guidelines.

Eminence Lil' Buddy 10 50W Guitar Speaker

Read 1 Review