Features a ferrite (ceramic) magnet structure.

The 2446H/J is a professional quality high-frequency compression driver that incorporates JBL's newly developed Coherent Wave phasing plug as well as a pure titanium diaphragm with radial ribs and patented three-dimensional diamond pattern suspension.

The Coherent Wave phasing plug assembly consists of four die-cast annular aperture structures of constant path length to provide m-phase combining of diaphragm output at the driver's exit. This optimized configuration allows coherent summation of acoustical power up to much higher frequencies than afforded by earlier designs.

The diaphragm design includes JBL's exclusive three-dimensional diamond pattern surround which reduces membrane stresses in the diaphragm support structure and extends diaphragm life. The depth of the diamond pattern is closely controlled during the manufacturing process to provide predictable frequencies for the 2nd and 3rd normal resonance modes and for the basic suspension resonance mode. The diaphragm also incorporates a series of embossed radial reinforcing ribs that increase diaphragm stiffness. This diaphragm, when combined with the Coherent Wave phasing plug, increases the 2446H/J's output in the 5 kHz to 20 kHz range.

High-temperature voice coil former materials and adhesives enable the 2446H/J to handle extremely high power levels over extended periods of time. The voice coils themselves are identical to previous JBL models, so that impedance and network matching will be the same. After manufacture, the frequency response of each driver is tested for conformity to JBL's rigid performance standards.

2446H/J is ruggedly constructed to withstand the rigors of both fixed and transportable commercial applications. All cast parts and machined tolerances are held to the same levels traditionally associated with JBL designs. The JBL manufacturing process also permits the use of rim centered rather than pin mounted diaphragms, for instant interchangeability and ease of field service.

JBL 2446H/J High Frequency Compression driver Features:

• Ferrite (ceramic) magnet structure
• 100 watts continuous program power handling when used above 500 Hz
• 150 watts continuous program power handling when used above 1 kHz
• 500 Hz to 20 kHz response
• 8 ohm (H) or 16 ohm (J) impedance
• 111 dB sensitivity (1W/1m on 2380A horn)
• Coherent Wave phasing plug design for increased high-frequency output
• 100 mm (4") pure titanium diaphragm with radial-rib topology
• 100 mm (4") edgewound aluminum voice coil
• Net weight: 13.8 kg (30.5 lb)

Put it in the cart!

JBL 2446H/J High Frequency Compression driver Specifications:

• Throat Diameter: 49 mm (2 in)
• Nominal Impedance: 2446H 8 ohms
• 2446J 16 ohms
• Minimum Impedance: 6 ohms (H), 12 ohms (J) @ 5 kHz
• DC Resistance: 4.3 ohms (H), 8.5 ohms (J) +/- 10% @ 25°C
• Power Capacity: 100 W continuous program above 500 Hz
• 150 W continuous program above 1 kHz
• Sensitivity: 111 dB SPL, 1 W @ 1 m on-axis on horn
• 118 dB SPL, 1 mW on plane-wave tube
• Nominal Efficiency: 30% (500 Hz to 2.5 kHz)
• Frequency Range: 500 Hz to 20 kHz
• Recommended Crossover: 500 Hz or higher, 12 dB/octave minimum
• Diaphragm: 0.05 mm (0.002 in) pure titanium
• Voice Coil Diameter: 100 mm (4 in)
• Voice Coil Material: Edgewound aluminum ribbon
• Flux Density: 1.9 T (19,000 gauss)
• Bl Factor: 12.7 (H) N/A, 18 (J) N/A
• Positive voltage to black terminal gives diaphragm motion toward the phasing plug
• Dimensions: 235 mm (9-1/4") diameter
• 131 mm (5") depth
• Mounting: Four 1/4-20 threaded holes, 90° apart on 101.6 mm (4") diameter
• Net Weight: 13.8 kg (30.5 lb)

JBL 2446H/J High Frequency Compression driver